TSPROF K03 PRO

All-In-One means a collection of redundant options intentionally included in the kit.

• All-In-One Pivot Unit Bushing Options: Standard, Anti-Friction, and Low-Friction/Heavy-Duty. You can test all three to make the best choice.
• All-In-One Guide Rod Handle Options: Wooden, Plastic, Oversized, and Three-Finger. Try all four to find your ergonomic preference.
• All-In-One Sharpening Angle Control: Use your own digital angle gauge with the dedicated holder to verify Axicube-I measurements.
• All-In-One Reconfigurable Fillet Clamp Setup: Use our recommended single, dual, triple, and quadruple configurations—or experiment with your own.

Chameleon refers to a set of 3D-printed parts made from the same filament. Three guide rod handles, a light adapter, clamp extensions, and a screwdriver holder will all share the uniform style you select.

TSPROF K03 PRO

BLACK

CHAMELEON

• 🏗️Main Parts
• ☢️K03 PRO SUBATOMIC Core: A serial-numbered structural frame with rotary and clamp bar
• ↕️PRO Height Adjuster (POM version): Rack and pinion lift for fine sharpening angle adjustment in range 8° to 39° with accuracy of 0.1°
• 🕳️Heavy Stand
• ⛷️Pivot Unit Bushing Options (All-In-One )
• ⛸️Stock Brass Bushing (pre-installed)
• 🥌Anti-Friction Polyacetal Bushing
• 🥏Oilless Brass-Graphite Bushing (Low-Friction + Heavy Duty)
• ↔️Full Titanium Guide Rod
• 🦿Two 8mm lightweight titanium shafts for better pressure control
• 🔗Rigid Coupling connects the two shafts with a solid and high-precision hold
• 🅿️Spring-Assisted Parking Ring
• 🛑Spring-Assisted Stopper Ring
• 🧱Universal Stone Holder (Axicube-I) supports any sharpening stones sized 4" to 8", with optimal visibility for narrow stones and full compatibility with Edge Pro and KME format-factors.
• 🫷Guide Rod Handle Options (All-In-One )
• 🪵Stock Wooden 35-mm Ball Handle
• 🫴50-mm Grito-Handle
• 🫳35-mm Ball Handle
• 🤏3-Finger Handle
• 🔬Sharpening Angle Control (All-In-One )
• 📐Axicube-I Integrated Angle Finder - determines the true value of sharpening angle at any moment in any point, regardless of knife geometry, but only if it's used as stone holder.
• 🧲Digital Inclinometer Holder - adapter for any magnet-assisted digital angle gauge (for double control)
• 📏Metal Thickness Compensator
• 🎛️Reconfigurable Fillet Clamp Setup (All-In-One)
• 🔪2x Double Fillet Clamps with flexible flat springs and adjustable screws & spacers, max opening 2.5mm
• 🔪2x Kadet Whole Milled Fillet Clamps
• ⤴️2x L-Adapter for Clamps
• 🧩2x GearConnect Short Extensions
• 🔩Extra Screw Kit for Double Fillet Clamps
• 🔩2x Long Thumbscrew for Clamps (M5x30)
• 🩹Blade Protection Inserts for Clamps (8 pcs)
• 🔆Sharpener Light System
• 💡VIJIM VL66 LED Light - U-fork design with 360° rotation, Built-in 2000mAh battery (up to 8 hours of battery life, color temperature 3200K - 6500K, USB Type-C)
• 🦾Triple-Segment Aluminum Alloy Magic Arm for LED Light
• 🧩Light Mount for K03 PRO (Gen.3)
• 🧰Tools and Accessories
• 🪛Hex Screwdriver Set: Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, and 5mm sizes.
• 📤 LE Series Hex Screwdrivers Holder
• 📈Waterproof Grand Logarithmic Grit Chart
• 🔧Parts Kit
• 📒User's Guide
• 📦Reinforced Wooden Box

Recommended configs:

• 1️⃣ Single: Combine 2× Whole Milled Fillet L-Clamps in inward orientation to create a “Virtual Single” clamp. (Recommended for very small knives)
• 2️⃣ Dual: Use 2× Whole Milled Fillet L-Clamps in either inward or outward orientation. (Recommended for thick knives)
• 3️⃣ Triple: Pair a “Virtual Single” Whole Milled Fillet L-Clamp (primary) with 2× Double Fillet Clamps (support). (Recommended for distal-taper, full-flat grinds)
• 4️⃣ Quadruple: 2× Double Fillet Clamps + 2× Whole Milled Fillet L-Clamps, all placed at full-contact sweet spots. (Best results when aligned properly)
• 4️⃣ Quadruple: 2× Double Fillet Clamps + 2× Whole Milled Fillet L-Clamps in outward orientation, evenly distributed. (Recommended for long, flexible fillet knives)

Hints:

• L-Adapters can attach to Double Fillet Clamps to form a “Clamp Twin.” This is a viable option for certain blade geometries but is limited to a dual configuration and is less rigid than the standard setup.
• L-Clamps may face either inward or outward—orientation is flexible.
• To locate full-contact sweet spots, insert the blade no more than 5mm deep into the jaws.
• Use GearConnect Short Extensions to increase insert depth.

Please note that 3D-printed products and products with 3D-printed components may have natural variations due to the manufacturing process.

• 📷Illustrative Images. Product images are for reference only and may not precisely represent the actual item. Some images may depict a range of products or be for illustration purposes.
• 🎨Surface & Color Variations. Due to the nature of 3D printing, products may have minor surface inconsistencies, layer lines, or slight imperfections. Colors may also differ from product photos due to material variations and lighting conditions.
• 🛠️Engraving & Labeling Variability. Logos and brand names of Gritomatic, Leading Edge, and other companies, as well as labels including product and series names, country of origin, grit values, and functional labels, may be laser-engraved or missing on 3D-printed parts at our discretion. Their placement, orientation, size, depth, visibility, texture, and font may vary and could have minor defects.
• 🎨Color Selection & Variability. If a product has color variations, the selected option refers only to the primary color of 3D-printed components. Non-3D-printed parts and secondary colors are not affected by this selection. If the product does not offer color choices, the actual color of 3D-printed parts is at our discretion.

These variations do not affect the functionality of the product. By purchasing, you acknowledge and accept these characteristics as part of the 3D printing process.