Joseph L.
The heck's Drive I purchased is very well made I really like it use on RC planes thank you
Wu C.
I bought the set of hexdrivers and this will serve as a review of them. Good texture on the handle for a nice grip. Shafts are sturdy and the tips are squared. Nice weight for duty use unlike those plastic handled units. Would have like to have a hole near the end of the end of the handle to insert a bar for added leverage with stubborn screws.
Jeremiah M.
It’s definitely NOT a good fit, i have the Hapstone RS, and thought it would b convenient for the clamps,, well the end is definitely NOT round, like the HAPSTONE 3mm
Ball end driver,,,The RS clamps take 3mm and u DONT sell the 3mm You only have the 4mm and 5mm
Once again I’m speaking of the clamps
I have to fumble with it EVERY SINGLE TIME
BECAUSE OF THE FIT.
Eric H.
The screwdriver is sturdy and well made. I would recommend it to a friend.
James K.
It's a hex driver. It does what it is supposed to do.
Bradley Taylor
Good quality screwdriver. 4mm fits my tsprof kadet well (clamps). Knurling gives a solid grip which is good as this system needs tightened down pretty well.
Lukas Schueler
Works great
got it for my tsprof ko3 and it’s amazing but it wouldn’t turn right when i got it but i was able to fix the screwdriver and now it’s great.
Michael Blankenship
I really want to like this tool but it's been disappointing so far. The handle is knurled and feels good during use and it's a good looking tool. Unfortunately the second time I used it on my TSPROF knife sharpener, the shaft started spinning in the handle. I loosened the set screw and made sure the shaft was properly positioned on the flat bevel and re-tightened the set screw...except the set screw then stripped out and I am no longer able to get the set screw to tighten very well. Maybe I just received a poor quality set screw?
Jean C Torres Vazquez
Awesome!!!! Quality
Anonymous
A nice little tool
I used this with my Blitz Pro system. Good quality tool for tightening down clamps.
Craig Barker
Hex screwdriver
I am very happy with the prompt service and delivery of their products. Their customer service was very helpful in helping me find what I needed.
Craig
Frank Martin
Great Product
Fine quality product!
Frank Martin
Perfect for what I need
Works great with my TSPROF Blitz Pro.!
Frank Martin
Works great
Works great with my TSPROF Blitz Pro jaws!!
James A. Smith Sr.
Tsprof 2.5mm hex screwdriver for Tsprof sharpeners. Perfect fit.
Martin L Bravo
Perfect
This was perfect for what I needed. It's also awesome to see they now come with end caps. Not 100% needed. It just makes the driver look nicer.
Martin L Bravo
Solid driver
It is nice to see a 4mm hex driver. Usually these are hard to find. Worked perfect for kadet clamps
John McKown
Hex Screwdriver
It works great and better than the allens wrenches.
John McKown
Works great and better than the allen wrenches.
chris jorgenson
High quality tool at a great price.
Andrew Willing
Double check your application
I purchased the wrong one on accident. This 2MM fits the small body screws and set screws of the Blitz. The one you need for the Blitz 360 “whole-milled” clamp screws is the 2.5MM screwdriver.
![Ремень из воловьей кожи [6 x 1 дюйм]](http://ru.gritomatic.com/cdn/shop/files/cowhide-leather-strop-on-anodized-blank-for-edge-pro-Colorless_600x@3x.progressive.jpg?v=1739340879)
![Ремешок из тонкой воловьей кожи на анодированной заготовке [6 x 1 дюйм]](http://ru.gritomatic.com/cdn/shop/files/fine-cowhide-leather-strop-on-anodized-blank-6-x-1_600x@3x.progressive.jpg?v=1739344590)
![Steel Blank for Work Sharp [6" x 1" PPA]](http://ru.gritomatic.com/cdn/shop/files/Empty_20Steel_20Blank_20for_20PPA_600x@3x.progressive.jpg?v=1739341378)
![Точильный камень из карбида кремния [8" x 3"]](http://ru.gritomatic.com/cdn/shop/files/8-x-3-silicon-carbide-sharpening-stone_600x@3x.progressive.jpg?v=1739346256)
